Houston Water and Mold Guide

How long drying takes after a leak

By Neil Walker ยท Updated November 22, 2026

Most clean-water jobs in a house dry in about 3 to 5 days with professional equipment. Dense materials, trapped water and Category 3 losses take longer. The goal is to get drying started inside the 24 to 48 hour window the EPA points to for preventing mold.

A typical schedule

WhenWhat happens
Hour 0 to 24Stop the source, extract standing water, map moisture with meters, set air movers and dehumidifiers, remove anything that cannot be saved.
Day 1 to 3Daily moisture readings. Equipment is moved as areas dry. Baseboards or small wall cuts may open trapped cavities.
Day 3 to 5Most drywall and framing reaches dry goals. Readings are recorded for the insurance file.
Day 5+Hardwood, subfloor, concrete and cabinets can take longer. Equipment stays until readings match dry, unaffected areas.
After dryingBuild-back: drywall, paint, baseboards, flooring and cabinets.

What slows drying down

How you know it is really dry

Dry is a number, not a feeling. A good drying log compares readings in wet areas to readings in dry, unaffected areas of the same material, every day, until they match. The EPA recommends keeping indoor humidity below 60 percent, ideally 30 to 50 percent.

Common questions

Can I turn the fans off at night?

It is best not to. Drying equipment works around the clock, and turning it off adds days and can let moisture levels climb back up.

Why is my wall still wet when it feels dry?

The surface can feel dry while the back of the drywall, the framing or the insulation is still wet. Moisture meters show what touch can't.

Sources

  1. EPA: A Brief Guide to Mold, Moisture and Your Home
  2. IICRC (Institute of Inspection, Cleaning and Restoration Certification)